Scaffolding stamping parts requirements for stamping die materials

In the process of processing and producing scaffold stamping parts, the stamping dies used often need to withstand loads such as impact, vibration, friction, high pressure, tension, and bending. In actual work, plastic molds may even face higher working temperature conditions. Due to the complicated working conditions, they are likely to suffer from wear, fatigue, fracture, and deformation. Because of this, in order to ensure the production quality of scaffold stamping parts, when selecting molds, the requirements for its materials are also stricter, at least higher than those of ordinary parts. In addition, due to the different working conditions of different molds, the requirements for mold parts materials are also different. At the same time, combined with the analysis of the production requirements of scaffolding stampings, if you need to use a punching die, you should have high wear resistance and hardness when selecting raw materials. This is because when punching, it is necessary to ensure strong wear resistance and compressive yield point, and at the same time to avoid the problem of mold fracture as much as possible, so it should have high fracture resistance and high resistance at the same time. Bending strength and toughness. If in the process of processing scaffolding stampings, a drawing die is required, then the material requirements are good adhesion resistance, high wear resistance and hardness, and appropriate toughness. And good cutting performance, and the deformation during heat treatment should be small. Related news: The characteristics of the main materials of stamping parts, the handling of common problems of stamping parts, the characteristics of scaffolding stamping parts and the importance of inspections